Мой код по умолчанию снова! Боже мой!

Manoel Victor · 25-10-2011 16:52

Мой код обратно по умолчанию опять же, я думал, что я решил эту проблему, но вдруг он дал неисправных снова! Я не знаю, что я делаю! Когда я ставлю один враг CJ, это дает не проблема, но когда я ставлю два, GTA падает, когда я иду на сайт! См. мой код:
враг_1

// This file was decompiled using sascm.ini published by Seemann (http://sannybuilder.com/files/SASCM.rar) on 13.10.2007

{$VERSION 3.1.0027}
{$CLEO .cs}

//-------------MAIN---------------
0000: NOP 

:NONAME_2
wait 500 
if 
00EC:   actor $PLAYER_ACTOR 0 near_point 1508.885 2918.351 radius 114.363 116.0 
else_jump @NONAME_2 
Model.Load(#BMYDRUG)
Model.Load(#DESERT_EAGLE)
060A: create_decision_maker_type 0 store_to 10@ // decision\allowed\m_.ped files 
07E5: copy_decision_maker 10@ to 11@ 
04C4: store_coords_to 7@ 8@ 9@ from_actor $PLAYER_ACTOR with_offset 0.0 0.0 0.0 
038B: load_requested_models 
2@ = Actor.Create(Gang1, #BMYDRUG, 1510.019, 2915.165, 9.4218)
Actor.Health(2@) = 1700
0446: set_actor 2@ immune_to_headshots 0 
060B: set_actor 2@ decision_maker_to 11@ 
07DD: set_actor 2@ temper_to 100 // see pedstats.dat 
02E0:   actor 2@ aggressive 
01B2: give_actor 2@ weapon 24 ammo 9999 // Load the weapon model before using this 
wait 800 
05D3: AS_actor 2@ goto_point 7@ 8@ 9@ mode 6 -1 ms // versionA 
05E2: AS_actor 2@ kill_actor $PLAYER_ACTOR 
07A5: AS_actor 2@ attack_actor $PLAYER_ACTOR -1 ms 
jump @NONAME_217 

:NONAME_217
wait 500 
if 
   Actor.Dead(2@)
else_jump @NONAME_217 
jump @NONAME_245 

:NONAME_245
wait 500 
Actor.DestroyInstantly(2@)
wait 8000 
jump @NONAME_2

враг_2

// This file was decompiled using sascm.ini published by Seemann (http://sannybuilder.com/files/SASCM.rar) on 13.10.2007

{$VERSION 3.1.0027}
{$CLEO .CS}

//-------------MAIN---------------
0000: NOP 

:NONAME_2
wait 500 
if 
00EC:   actor $PLAYER_ACTOR 0 near_point 1489.602 2930.958 radius 114.363 116.0 
else_jump @NONAME_2 
Model.Load(#HMYDRUG)
Model.Load(#CUNTGUN)
060A: create_decision_maker_type 0 store_to 10@ // decision\allowed\m_.ped files 
07E5: copy_decision_maker 10@ to 11@ 
04C4: store_coords_to 7@ 8@ 9@ from_actor $PLAYER_ACTOR with_offset 0.0 0.0 0.0 
038B: load_requested_models 
2@ = Actor.Create(Gang1, #HMYDRUG, 1494.824, 2932.765, 9.9839)
Actor.Health(2@) = 1700
0446: set_actor 2@ immune_to_headshots 0 
060B: set_actor 2@ decision_maker_to 13@ 
07DD: set_actor 2@ temper_to 100 // see pedstats.dat 
02E0:   actor 2@ aggressive 
01B2: give_actor 2@ weapon 27 ammo 9999 // Load the weapon model before using this 
wait 800 
05D3: AS_actor 2@ goto_point 7@ 8@ 9@ mode 6 -1 ms // versionA 
05E2: AS_actor 2@ kill_actor $PLAYER_ACTOR 
07A5: AS_actor 2@ attack_actor $PLAYER_ACTOR -1 ms 
jump @NONAME_217 

:NONAME_217
wait 500 
if 
   Actor.Dead(2@)
else_jump @NONAME_217 
jump @NONAME_245 

:NONAME_245
wait 500 
Actor.DestroyInstantly(2@)
wait 8000 
jump @NONAME_2

Пожалуйста, помогите мне! Я не знаю, что я делаю! Что не так с этими кодами? Когда я ставлю только во-первых, она идет хорошо, но когда я ставлю эти два на нерест двух врагов, замок GTA! Помогите пожалуйста!
cry

~AquaZ~ · 25-10-2011 20:21

Please, write in Engish. I can't understand this "language".

Den_spb · 25-10-2011 20:25

Manoel Victor, I already have written right code for you.
Why do you repeat your mistakes again?

Manoel Victor · 25-10-2011 22:05

I tried that code, but it was bug, because when I shot, the character ducked in fear, and the shots I took him very little health. And sorry for the language, it is because I used Google Translate, which is a real shit, sorry to say.

Last edited by Manoel Victor (25-10-2011 22:05)

~AquaZ~ · 25-10-2011 23:44

Manoel Victor wrote:

...because I used Google Translate, which is a real shit, sorry to say.

It is not that shit as you think. If you want to have a good translation with it, translate result text back in English, and you will see some mistakes. Then try to rewrite text so it will be readable.
P.S. Sorry for my English and offtop.

Manoel Victor · 26-10-2011 00:30

But I do not speak Russian! I Can not identify errors! grin

~AquaZ~ · 26-10-2011 00:43

I mean that you should to translate into Russian and translate result text back into English. Then in it identify errors and rebuild sentences. Do that until you get normal back-translation.

Last edited by ~AquaZ~ (26-10-2011 00:44)

Ivan_Goblin · 26-10-2011 01:54

прикол скрипт я не нашол model.avisable или как там проверка на загрузки модели

Manoel Victor · 26-10-2011 14:39

Please speak english! I not understand russian! I tried translate your text in russian with google translate,but not work! I not understand what you speak!

Yoda · 26-10-2011 15:35

Manoel Victor wrote:

Please speak english! I not understand russian! I tried translate your text in russian with google translate,but not work! I not understand what you speak!

Don't pay attention. Even we - russians, doesn't always understand him. He is a schoolboy - studying ... to communicate and express his thoughts... even in russian language. He meant that your code doesn't have a required check of model.available.

Manoel Victor · 26-10-2011 18:48

I tried with model.available and not work!!!!!! Please help me!!!!!!!!!!!!!!!! cry

SannyBuilder.com Forums

#1 25-10-2011 16:52

Мой код по умолчанию снова! Боже мой!

#2 25-10-2011 20:21

Re: Мой код по умолчанию снова! Боже мой!

#3 25-10-2011 20:25

Re: Мой код по умолчанию снова! Боже мой!

#4 25-10-2011 22:05

Re: Мой код по умолчанию снова! Боже мой!

#5 25-10-2011 23:44

Re: Мой код по умолчанию снова! Боже мой!

#6 26-10-2011 00:30

Re: Мой код по умолчанию снова! Боже мой!

#7 26-10-2011 00:43

Re: Мой код по умолчанию снова! Боже мой!

#8 26-10-2011 01:54

Re: Мой код по умолчанию снова! Боже мой!

#9 26-10-2011 14:39

Re: Мой код по умолчанию снова! Боже мой!

#10 26-10-2011 15:35

Re: Мой код по умолчанию снова! Боже мой!

#11 26-10-2011 18:48

Re: Мой код по умолчанию снова! Боже мой!

Board footer